8 Base Transceivers TS-890S HF/50 MHz Transceiver Looking for an exceptional rig that can handle truly challenging conditions? Then upgrade your shack with Kenwood's most advanced DSP transceiver, the TS-890S HF/50 MHz. Features include: • 160-6 meters 100W all modes with built-in antenna tuner • Impeccable receiver and audio performance • 7 inch color TFT touch display with auto-scroll band-scope and multipurpose display • Animated meter display toggles between TS-930 meter and TS-940 meter at a touch! • Full down-conversion superheterodyne • Advanced DSP Noise Reduction function • Extra-low phase noise local oscillator • Built-in roofing filters, 15 kHz, 6 kHz, 2.7 kHz, and 500 Hz (270 Hz optional) • IF output for external receiver display • Encode and decode built-in for CW/PSK/RTTY • 120 channel memory HF enthusiasts who want to move to the next level can get the full story by entering "TS-890S" at DXEngineering.com. Two TS-890S accessories are also now available: the YG-82CN-1W 270 Hz Crystal Roofing Filter and the SP-890W Base Station Speaker. KWD-TS-890S HF/50 MHz Transceiver ....................................................CALL/WEB KWD-SP-890W External Speaker for TS-890S ..............................................$265.99 KWD-YG-82CN-1W 270 Hz Crystal Roofing Filter ...............................................$205.99 TS-590SG HF/6 Meter Base Transceiver Designed for the most demanding DX and contest operators, Kenwood’s TS-590SG 100 watt transceiver boasts highly-reliable transmit outputs to deliver an exceptionally good transmit signal. The 100 watt TS-590SG has the best receive dynamic range in its class versus of -frequency interference. It features a 32-bit floating DSP, a built-in automatic antenna tuner, beat cancel and CW auto tune. USB and serial DB-9 ports make connection to a PC easy. The radio comes with Kenwood’s Control Sof ware and Radio Host Program for VoIP operation. KWD-TS-590SG HF/6 Meter Base Transceiver ............................................CALL/WEB IC-718 HF Base Station Transceiver The most practical DSP rig you’ll ever own! It covers 160 to 10 meters (except 60 meter) in CW, RTTY and AM modes. Power Requirement: 13.8 Vdc @ 20A. Dimensions: 9.4" W x 3.75" H x 9.4" D. Weight: 8.5 lbs. • 5-100 watts adjustable output power • 2-40 watts AM • 101 scannable memory channels • 0.03-30 MHz RX coverage • IF shif control • Mic compressor • RF gain control, RF attenuator/preamp • Auto-notch filter • Electronic CW keyer, VOX voice operation • Digital S/RF meter • High frequency stability • Optional filter selection • Front facing speaker • Hand mic included ICO-IC-718 HF Base Station Transceiver ............................................CALL/WEB ICO-MB-23 Transceiver Carrying Handle Kit for IC-718 .......................... $27.99 ICO-OPC-025D DC Power Cable, Inline Fuse Holder, Molex 6-Pin ............... $39.99 Accessory Part Number Description KWD-TS-590SG KWD-TS-890S Cable KWD-PG-20 DC Power Cable, Molex 4-Pin to Bare Wire, 2 Inline Fuse Holders x x Hand Microphone KWD-MC-43S Hand Mic, PTT Switch, 8-Pin Plug x x Voice Synthesizer KWD-VS-3 Plug-In Module, Voice Synthesizer x TCXO Unit KWD-SO-3 Plug-In Module, TCXO Unit x IC-905 VHF/ UHF/SHF All Mode Base/Portable Transceiver Take advantage of the Icom IC-905 transceiver—the first in the industry to of er the capability of operating up to 10 GHz with the optional CX-10G Transverter (sold separately). This QRP rig of ers all common operating modes: SSB and CW, AM/FM, and full D-STAR functionality with DV (digital voice), DD (data) modes and analog FM ATV (analog Amateur Television) with included AV input/output ports. Output power for the IC-905 is 10W on 144/430/1200 MHz, 2W on 2400/5600 MHz, and 0.5W with the optional 10 GHz module. The IC-905 features a 4.3" color touchscreen LCD with a high-performance real-time, bandwidth-adjustable spectrum scope and waterfall display. It also includes an ample number of ports to connect external accessories. The CX-10G Transverter works only with the IC-905. The IPX5 waterproof device converts 2.4 GHz IF signals to the 10 GHz band, opening a new range of frequencies for experimentation and communication. Powered by the IC-905, the lightweight unit connects directly to the transceiver. Also available are three Icom Colinear Antennas (2.4, 5.6 or 10 GHz) and a 10 GHz Parabolic Antenna—all fully compatible with the IC-905. Enter "IC-905" at DXEngineering.com for more details. ICO-IC-905 Icom IC-905 Transceiver ...................................................CALL/WEB ICO-CX-10G Icom 10 GHz Transverter for IC-905 ..................................... $999.95 ICO-AH-24 Icom 2.4 GHz Colinear Antenna with Mount ....................... $349.95 ICO-AH-56 Icom 5.6 GHz Colinear Antenna with Mount ....................... $349.95 ICO-AH-100 Icom 10 GHz Colinear Antenna with Mount ........................ $349.95 ICO-AH-109PB Icom 10 GHz Parabolic Antenna with Mount ...................... $999.95 NIF-DS-IC-705 Heavy-Duty Desk Stand .......................................................... $33.95 ICO-CX-10G Switch Pad 8 Transceiver Memory Keypad In a heated Amateur Radio contest, the right gear can make a huge dif erence. With this in mind, DX Engineering is excited to introduce its eight-button Switch Pad 8 Transceiver Memory Keypad—a new device that can give you a definite advantage. Designed for the ICOM IC-7610, IC-705, IC-7850 and IC-7851, and Kenwood TS-890S and TS-990S transceivers, this external keypad lets you select voice and CW keying memories without the need to access the keyer menu on the transceiver’s main touch screen. When contesting, this keeps your transceiver’s main screen at full functionality while enabling selection of keyer memories without the need of a computer program. For Kenwood transceivers, in addition to memory keyer access, any of 99 dif erent functions may be programmed to respond to one of the eight buttons, as described in the transceiver manuals. DXE-SWP8 Switch Pad 8 Transceiver Memory Keypad for Select ICOM/Kenwood Radios .............................................$96.99 IC-7100 HF/VHF/UHF Transceiver This versatile transceiver features intuitive dot-matrix LCD touchscreen; multi-function meter/SWR graphic display; angled control head; ample speaker; integrated CW keyjack, microphone, and control cable; D-STAR DV mode digital voice and low-speed data communications with optional module; 32-bit floating point DSP; DSP controller RF speech compressor; built-in SD card slot for voice storage and data cloning; RTTY demodulator and decoder; and 505 memory channels. Includes hand microphone; ACC, separation, and DC power cable; and electronic keyer and hand key plug. Enter “IC-7100” at DXEngineering.com for more details. ICO-IC-7100 HF/VHF/UHF Digital Transceiver ......................................CALL/WEB ICO-MB-62 Mobile Mounting Bracket .......................................................$44.99 ICO-MBA-1 Mobile Control Head Mounting Bracket ...............................$41.99 ICO-MBF-1 Suction Mount, Use with MBA-1 ............................................$85.99 ICO-CS-7100 Programming/Cloning Sof ware ...........................................$88.99 ICO-OPC-589 Mic Adapter Cable, 8-Pin Modular to 8-Pin Round ...............$39.99 Back from ICOM by Popular Demand Orders by 10 pm ET ship the same day. See pg. 74 for details.