98 Mounting - There are pros and cons of every antenna mounting location. A glass mount can be removed without leaving a trace, but may compromise antenna gain. Drilling a hole in your roof is the best option for performance, but then…you’ll have a hole in your roof. In fact, simply moving your antenna from the front to the back of your vehicle can drastically af ect your signal. Monoband Mobile Antennas These tested and well-built helical-wound mobile whip antennas deliver excellent performance at a friendly price, from the Top Band model through 6M. Capable of a VSWR of 1.5:1 or better, each has a 3/8-24 mounting stud. Mount not included. MKR-12-054 160M Mobile Antenna, 100W .............................................$109.99 MKR-12-056 80M Mobile Antenna, 250W .................................................$39.99 MKR-12-057 60M Mobile Antenna, 250W .................................................$36.99 MKR-12-058 40M Mobile Antenna, 250W .................................................$36.99 MKR-12-060 30M Mobile Antenna, 250W .................................................$35.99 MKR-12-062 20M Mobile Antenna, 250W .................................................$35.99 MKR-12-064 17M Mobile Antenna, 250W .................................................$34.99 MKR-12-066 15M Mobile Antenna, 250W .................................................$34.99 MKR-12-068 12M Mobile Antenna, 250W .................................................$34.99 MKR-12-070 11M Mobile Antenna, 250W .................................................$34.99 MKR-12-072 10M Mobile Antenna, 250W .................................................$34.99 MKR-12-074 6M Mobile Antenna, 250W ...................................................$33.99 Hot Rodz® Capacity Hat for Screwdriver Antennas This fully adjustable system attaches directly to any screwdriver antenna. Hot Rodz allows you to remove the long whip from your antenna while increasing ef iciency, so you can use less coil for any given frequency. The Hot Rodz Capacity Hat comes with a 22 inch tall mast, and six each of the 6 inch, 12 inch and 24 inch stainless steel rods. DXE-HR-2P Hot Rodz Capacity Hat for Screwdriver Antennas............. $121.99 Hot Rodz® Capacity Hat Components Increase the ef iciency of your own shortened antenna by building your own Hot Rodz Capacity Hat system. Visit DXEngineering.com for complete details. DXE-HRHUB-1P Hot Rodz Hub, Smooth Bore with Set Screws .....................$32.99 DXE-HRHUB-2P Hot Rodz Hub, Threaded Bore ..............................................$35.99 DXE-RODZ-48P Hot Rodz 48" Stainless Steel Rods ........................................$31.99 DXE-RODZ-36P Hot Rodz 36" Stainless Steel Rods ........................................$27.99 DXE-RODZ-60P Hot Rodz 60" Stainless Steel Rods ........................................$31.99 DXE-RODZ-72P Hot Rodz 72" Stainless Steel Rods ........................................$33.99 Hot Rodz® Capacity Hat for Hustler Mobile Antennas This fully adjustable system attaches directly to your Hustler HF antenna. Hot Rodz improves ef iciency, allowing the use of a smaller loading coil for a given frequency band. Other benefits include wider bandwidth and the ability to use a single coil on multiple bands. The Hot Rodz Capacity Hat comes with a precision-machined 6061-T6 aluminum hub with stainless steel set screws and six each of 6 inch, 12 inch and 24 inch stainless steel rods. DXE-HR-1P Hot Rodz Capacity Hat for Hustler Mobile Antennas .................. $99.99 DXE-WP-102 Mobile Whip Antenna DX Engineering’s WP-102 is the classic 102" whip, perfect for 10 meter operation. It’s made from heat-treated 17-7 PH tapered stainless steel, which resists bending and kinking, while providing good corrosion resistance and minimum distortion. The WP-102 is ideal for mobile and portable operations and for Active Receive Antenna Systems. It's also great for use with mobile antenna tuners. The whip features a 3/8"-24 stud mount. DXE-WP-102 Mobile Whip Antenna, Tapered, 1-Piece, Stainless Steel, 8.50' Length, 3/8"-24 Stud ........................$32.99 COMPACtenna DX Engineering is pleased to carry COMPACtenna’s line of small, multi-band antennas (7" to 20" tall) designed for high performance on a small 3' x 3' metal ground plane with no tuning required of the antenna. Small enough to fit in the attic, a closet or outside without drawing attention, they’re a smart choice for HOAs, condos, apartments, or anywhere you—or your neighbors—don’t want large antennas. Mounted on vehicles, these antennas can provide easier passage into a garage or drive-thru. Choose from single-band, dual-band, tri-band and scanner antennas. The SCAN-III antenna (100-1,500 MHz) is optimized for public service-safety and government frequency bands. The Ultimate 220 MHz Antenna (CAN-220MAX) of ers maximum gain, higher power handling, and low SWR. CAN-220MAX Ultimate 220 MHz Antenna, 9" Tall, 65W ............................$139.00 CAN-2M-220-440 2M/220/440 Tri-Band Antenna, 7" Tall ...............................$129.00 CAN-2M-440 2M/440 Antenna, 7.5" Tall, 85W 2M; 50W 70cm .................$119.00 CAN-2M-440PLUS 2M/440 Antenna, 9" Tall, 100W 2M; 75W 70cm ..................$139.00 CAN-SCAN-III Police/Fire/Government Optimized Antenna, 9" Tall .......$149.00 CompacCounterpoise NMO Mount Base Station Ground Planes These kits turn your COMPACtenna antennas into sturdy and stealthy base stations. Add the provided radials to optimize signals and SWR for UHF/VHF operation, with a maximum power rating of 250 watts (up to 225 MHz) and 100 watts on higher frequencies. Kits come with 3" diameter mounting plate with mast bracket, clamps, four 18" radials, and stainless steel hardware. They work with many monoband or multi-band NMO-mount antennas, including COMPACtenna’s 2M-440, 2M-440PLUS, 2M-220-440, SCAN-III, and the LMR-I Land Mobile Radio Antenna. CAN-COUNTERPOISE SO-239, Mounts Antennas from 144 to 512 MHz ..............$129.00 CAN-COUNTERPOISE-N N Female, Mounts Antennas from 144-1,000 MHz ...........$109.00 LMR-I Land Mobile Radio Antenna The high-performance, low-profile LMR-I Land Mobile Radio Antenna provides coverage of three optimized frequency ranges: High VHF 136-174 MHz, Low UHF 378-512 MHz, and High UHF 750-960 MHz. With a power rating of 100W VHF/75W UHF and omni-directional coverage, this 9" tall cylindrical radome-style antenna makes a great choice for analog and digital operation modes for Police, Fire, Sherif , Emergency Medical, State Highway Patrol, Homeland Security, U.S. Federal, Military and Business- Commercial applications. It features a leaf-spring style NMO mount base for standard center-stud style NMO mobile mounts. It may be mounted on a vehicle, or it can be used for base station/repeater operations by adding an optional COMPACtenna CompacCounterpoise. CAN-LMR-I Land Mobile Radio Antenna ................................................$199.00 Compact Land Mobile Radio Antenna This 5.25" model has a 100W power rating, covers 162-174 MHz, and makes a good choice for both analog and digital operation modes. CAN-168 Land Mobile Radio Antenna ................................................$280.00 CAN-COUNTERPOISE Antennas: Mobile SkyScan VHF/UHF Receive Scanner Antennas With an RX frequency range from 25-2,000 MHz, this omnidirectional, discone-style, vertically polarized antenna makes a solid choice as a desktop scanner or for SWL. The SkyScan measures 27.56" tall and comes with magnetic base for use on a stationary vehicle. It also includes 13' of RG-58 coaxial cable installed on the base with a BNC male connector on the receive end. Not for use on moving vehicle. MKR-11-533 VHF/UHF Desktop Scanner Antenna ............$85.99 SkyScan VHF/UHF Mobile Receive Scanner Antenna This antenna features four dif erent length elements tuned for specific frequency ranges from 25-2,000 MHz. The 25.6" tall antenna comes with 3.5" magnetic mount with rubber base padding to protect your vehicle, along with 13' of RG-58 coaxial cable with BNC connector on one end. MKR-12-202 VHF-UHF Mobile Scanner Antenna ....................................... $35.99 Preamplifiers for Scanners/Receivers Get the most out of your scanner or receiver with these well-built wideband preamplifiers from Moonraker. The MKR-20-000 model (MRP 2000) covers 25-2,000 MHz and has a preamplifier gain from 6 to 20 dB. The MKR-20-001 version covers 24-2,300 MHz and features a variable gain control (-10 to +22 dB), and switched band pass filters to minimize interference. Units come with BNC connectors and patch cable. Preamps can be powered by required internal 9V battery or VDC supply. MKR-20-000 25-2,000 MHz Scanner Preamp ............................................... $82.99 MKR-20-001 24-2,300 MHz Scanner Preamp with Gain Control ..............$109.99 MKR-11-533 CAN-220MAX Most in-stock parts ship throughout the contiguous US in just 1-2 days!
