49 AT-1000ProII Automatic Antenna Tuner • 1,000 watts power handling maximum • 1.8 to 54 MHz frequency range • 2,000 memories for each antenna and auto configuration storage • Tunes 6 to 1,000 Ω loads (16 to 150 Ω on 6M) • 10 second tuning time, 0.2 second memory tuning • Bar graph LED display shows SWR and selectable power ranges LDG-AT1000PROII ..........................$569.99 AT-1000ProII Automatic LDG-RT-100 LDG-RC-100 Remote Antenna Tuner and Console Package Just install one of these near your feedpoint, and you’ll remedy a lot of power loss issues due to SWR in your feedline. The tuner is packed with 2,000 memories for instant band switching with sizzling fast speed and precision. It can tune 4 to 800 Ω loads and is well suited for dipoles, verticals, inverted-Vs, beams or any coax-fed antenna. The 100 series handles up to 125 watts SSB/CW, and 30 watts digital. This combo package includes a remote control unit. The controller has an integrated DC power injector to supply the tuner, plus an on/of switch and tune button for comprehensive tuner control. LDG-RT-RC-100 100 Watt Remote Tuner and Console ........................................... $299.99 Antenna Tuner Cables The proper link between your tuner and radio is essential. LDG Electronics makes it easy to create the perfect match with these interface cables. Part Number Radio Notes Price LDG-IC-PAC Icom For radios with AH-3/4 port, 14" $10.99 LDG-Y-ACC Yaesu For FT-100/857/891/897/991A $12.99 LDG-Y-ACC-2 Yaesu For dx10, dx1200, 450, 950, others $12.99 LDG-Y-ACC-3 Yaesu For dx101D, dx101MP, and dx3000 $12.99 LDG-DC-PWR-CABLE LDG Replacement power cable, LDG devices $5.99 AT-200ProII Automatic Antenna Tuner • 250 watts power handling maximum • 1.8 to 54 MHz frequency range • 2-position switch with 8 antenna memories • 0.5 to 6 second tuning time • Tunes 6 to 800 Ω loads (6 to 3,600 Ω with 4:1 balun) • 4,000 memories for instantaneous band switching • Easy-to-read LED display for RF power, SWR and status • Requires 11 to 16VDC at 750mA LDG-AT-200PROII............................$319.99 Z-11ProII Automatic Antenna Tuner • 125 watts power handling maximum • 1.8 to 54 MHz frequency range • 0.1 to 6 second tuning time, 0.1 second memory tune • 4,000 memories with automatic storage • Tunes 6 to 100 Ω loads (16 to 150 Ω on 6M) • Can operate using four AA batteries with user-installed holder • Requires 6 to 16VDC at 300mA maximum, 25uA standby LDG-Z-11PROII ...............................$219.99 Automatic Antenna Tuner • Tailored to the Yaesu FT-817 radio • Excellent for QRP operation • 20 watts power handling maximum • 1.8 to 54 MHz frequency range • 2,000 memories, sorted by frequency • Tunes 6 to 600 Ω loads • Powered by 4 AA batteries (not included) LDG-Z-817 ........................................$149.99 AT-100ProII Automatic Antenna Tuner • 125 watts power handling maximum • 1.8 to 54 MHz frequency range • Two-position switch • 2,000 memories for each antenna and auto configuration storage • Tunes 6 to 1,000 Ω loads (16 to 150 Ω on 6M) • Matches virtually any coax-fed antenna • Bar graph LED display shows power, SWR, mode and status • Requires 11 to 16VDC at 500mA LDG-AT-100PROII............................$279.99 Z-100Plus Automatic Antenna Tuner • 125 watts power handling maximum • 1.8 to 54 MHz frequency range • 0.1 second memory tune • 2,000 memories, sorted by frequency • Tunes 6 to 800 Ω loads (16 to 150 Ω on 6M) • SO-239 in/out connections for dipoles, verticals, beams, etc. • Requires 7 to 18VDC at 100mA maximum LDG-Z-100PLUS ..............................$199.99 AT-600ProII Automatic Antenna Tuner • Tunes 6 to 800 Ω loads • 600 watts power handling maximum • Bright LED display • Requires 11 to 16VDC at 750mA • 1.8 to 54 MHz frequency range • Two-position switch with memories for each position • 0.5 to 6 second tuning time, 0.1 second memory tune • 4,000 memories for instant band switching LDG-AT-600PROII...................................................................................................$419.99 • Two-position switch with memories for each position LDG Z-100A-DXE Automatic Antenna Tuner and Interface Cables Package DX Engineering and LDG Electronics have teamed up to exclusively of er the Z-100A Automatic Antenna Tuner bundled with seven 36” cables: six interface cables for use with many popular Alinco, Icom, Kenwood, and Yaesu transceivers, and one DC power cable compatible for use with Elecraf , FlexRadio, and other 100W rigs. Weighing only 1.5 lbs., the compact Z-100A (6.30" W x 1.50" H x 6.30" D) features LDG’s famous 10:1 SWR tuning range that matches dipoles, verticals, end-fed wires, G5RVs, or even of - center-fed dipoles and Windom antennas. Covering 160 through 6 meters, the Z-100A delivers 125W PEP SSB and CW, and 30W Digital. The tuner works with all HF radios up to 125 watts RF output and can be interfaced with dozens of modern transceivers (an interface cable is not required for semi-automatic operation). Users benefit from its internal frequency counter and 2,000 memories to store each operating frequency with antenna tuning parameters. Memory retuning occurs in only 100 milliseconds, with the initial full tuning cycle requiring an average of only six seconds. Depending on the rig used, hams can execute quick automatic tuning either by pressing a button on the tuner or by pressing a button on the tuner or transceiver. LDG-Z-100A-DXE Z-100A Tuner with 6 Interface Cables/1 DC Power Cable ....$199.99 Automatic Remote Antenna Tuner and Remote Control Unit This weatherproof tuner works for long wires, verticals, dipoles, and other amateur, MARS or CAP operations between 1.8-30 MHz. The antenna wire connects to the unit's high-voltage standof insulator stud. A UHF female SO-239 connects the station coax, and a ground stud may be used for a counterpoise or earth ground. Featuring a 12-1,000 Ω range with power handling up to 200W PEP SSB/40W FT8, the CG-3000 is automatically activated with a low-power carrier. Low SWR tuning results are stored in a non-volatile memory which facilitates fast tuning on adjacent frequencies. The unit employs low-pass filtering to reduce spurious emissions and comes with 16' control cable to connect a 13.8VDC 2A power supply (not included). Includes mounting brackets and hardware. Optional Remote Control Unit CG-CTU below. CGA-CG-3000 Remote Antenna Tuner, 1.6-30 MHz .....................................$817.99 Remote Control Unit for CG-3000 The CG-CTU supplies the CG-3000 with power and a way to trigger the tuning process remotely. A provided 32.8' control cable assembly links the devices together. It also includes a tuner interface and power connection for Icom transceivers. The tuner is supplied with power via the radio, and the tuning process can be triggered via the Icom transceiver's "Tune" button. The CG-3000/CG-CTU combo works with all other rigs with an included connector cable that serves as a DC cable for connection to the station 13.8VDC power supply. Also includes an ON/OFF power switch and a TUNE button. CGA-CG-CTU Remote Control Unit for CG-3000 .........................................$153.99 URT-1500 High-Power Universal Outdoor Antenna Tuner Chameleon's robust URT-1500 outdoor tuner boasts compatibility with almost any antenna and transceiver model, ensuring optimal performance. Features include broad frequency coverage from 1.8- 30 MHz; power handling of 1,500W SSB/CW, 800W Digital, 400W for continuous modes like AM, FT8, RTTY, and WSPR; fast tuning and memory recall (matches antennas with impedance mismatches up to 16:1 in just eight seconds); rugged build for permanent installation; ability to operate with any transceiver without the need for brand-specific control cables, thanks to its bias-T-powered coupler unit; and versatility with multiple antenna options, including coax-fed antennas like inverted-Vs, dipoles, verticals, and random wire configurations. Includes coupler unit, hardwire power cord, mounting bracket, and pipe clamps. CHA-URT-1500 Universal High-Power Outdoor Antenna Tuner, 1.8-30 MHz ...................................................$899.00 URT-1 Outdoor Antenna Tuner Like the URT-1500, this versatile outdoor tuner does not require a brand-specific control cable and works with most antennas and transceivers. The HF+6M tuner includes 16,000 memories; handles 125W SSB/CW (100W on 6M), 60W for all other modes; and can match any antenna with an impedance of 5-1,500 Ω. CHA-URT-1T Universal Outdoor Antenna Tuner, 1.8-54 MHz ...................$399.00 Antenna Tuners DXEngineering.com is loaded with detailed photos, specs, videos, and more!
