124 Antenna Analyzers REU-STICK-PRO Stick Antenna Analyzers The RigExpert Stick 230 antenna analyzer delivers exceptional coverage (0.06-230 MHz) and a range of options for viewing results. The unit provides accurate measurements for 25 through 600 Ω systems. Display modes include SWR (return loss, R, X, Z, L, C, magnitude and phase angle at single frequency); SWR chart (100 points); SWR chart at fixed Ham bands by IARU regions (100 points); and multi-mode for proper checking of multi-band antennas. The Stick 230 analyzer features integrated Bluetooth technology, USB connection to a PC, and waterproof keypad. For wider coverage and the same great functionality and ease of use, choose the Stick-Pro (0.1-600 MHz). Joining the growing family of RigExpert stick analyzers are the Stick 500 (100 kHz-500 MHz) and Stick XPRO (0.1-1,000 MHz) models. All devices measure 7.3" x 1.6" x 1.3" and weigh an easy-to-transport 6.5 ounces. REU-STICK-230 0.06-230 MHz Stick 230 Antenna Analyzer ................. $329.99 REU-STICK-500 100 kHz-500 MHz Stick 500 Antenna Analyzer ........... $399.95 REU-STICK-PRO 0.1-600 MHz Stick-Pro Antenna Analyzer ................... $479.99 REU-STICK-XPRO 0.1-1,000 MHz Stick-XPRO Antenna Analyzer ............ $679.95 REU-STICK-HOLDER Stick Analyzer Belt Holder ............................................ $15.00 REU-STICK-500 REU-STICK-XPRO REU-STICK-230 CAA-500 Mark II Antenna Analyzer Improving on the revered CAA-500, the Mark II edition adds a full color LCD screen. The new display can show graphical and numerical SWR, total impedance (with X and R values), frequency and battery life. SWR and impedance are displayed simultaneously, allowing you to easily determine resonant frequency. The analyzer will scan a frequency range in mere seconds, to make antenna adjustments and troubleshooting much quicker. The analyzer has broad frequency coverage, twin analog meters and two antenna connection jacks. It is powered by six AA batteries, which provide up to 14 hours of operation. CMA-CAA500MARKII Antenna Analyzer ...................................................................$399.99 CMA-CAA-5SC Carrying Case ...........................................................................$42.99 Shackmaster™ OSL Calibration Kit Weighing only 5.6 ounces, this compact and precision-made three-in-one OSL calibration kit from RigExpert features a DC-2.5 GHz frequency range, three N-type 50 Ω standards, 250mW power rating, protection of connectors from external influences for higher accuracy, adjustable connector design, and return loss of -22 dB at 3 GHz and -31 dB at DC-1.5 GHz. REU-OSL-KIT OSL Calibration Kit ................................................................$89.99 Weighing only 5.6 ounces, this compact and precision-made Mini Vector Network Analyzers Following up on the well-respected heels of the NANOVNA-F network analyzer, the JNCRadio VNA 3 GHz Portable Vector Network Analyzer from Chelegance of ers an impressive coverage range (50 kHz through 3 GHz), with an improved sweep speed of 400 points/sec—four times faster than the NANOVNA-F. It features an upgraded and optimized user interface for maximum convenience and ef iciency when performing a range of measurements, plus loads of ham-friendly perks, such as its 4.3" IPS touch screen and a 5000mA rechargeable internal battery housed in an aluminum case with SMA connectors. The unit can be used for measuring SWR, impedance, reactance, phase, delay, and Q factor of RF circuits, filters, duplexers, amplifier strip lines, cables, antennas, and many other applications. It has a dynamic range of 70 dB for S21 and 50 dB for S11. Displaying in linear, polar and Smith Chart plots, the CE-, FCC- and RoHS-compliant device comes with an SMA Open-Short-Load Calibration Kit (NCE-CH0020004), RG405 cable, stylus, SMA adapters, and USB Type-C cable. NCE-CH0010005 JNCRadio 3 GHz Portable Vector Analyzer ............................$566.99 NANOVNA-F V2 3 GHz Mini Vector Analyzer The NANOVNA-F provides exceptional 3 GHz coverage and tons of functionality in a small package. It has an S21 dynamic range that’s greater than 70dB at 50kHz-1.5GHz and greater than 60dB at 1.5GHz-3GHz; the ability to function up to a continuous 7 hours due to its low-power design and 5000mAh rechargeable internal battery; sturdy metal enclosure; and easy firmware upgrades. It comes with Open-Short-Load Calibration Kit, RG405 cable, stylus, SMA adapters, and USB Type-C cable. Also available is the RF Demo Kit for VNA, featuring 18 RF circuits to demonstrate how each appears on the display when using a vector network analyzer. NCE-NANOVNA-F-V2 NANOVNA-F V2 3 GHz Mini Vector Network Analyzer .....$399.99 NCE-CH0020004 Open-Short-Load Calibration Kit for VNAs ........................$19.99 NCE-CH0020003 RF Demo Kit for VNAs ..........................................................$43.99 NCE-CH0020005 JNCRadio SMA Adapter Kit, Type-N to SMA ......................$28.99 NCE-CH0020006 JNCRadio SMA Adapter Kit, PL-259 and SO-239 to SMA .....$28.99 NCE-CH0020007 JNCRadio SMA Adapter Kit, BNC to SMA ...........................$24.99 NCE-CH0020008 Coax Adapter Assembly for VNA, RP-SMA Female to IPX, 7.9", Set of 2 ..................................$15.99 NCE-CH0020010 Type-N/UHF Coaxial RF Connector Adapters, Set of 4 .....$22.99 NCE-CH0030001 BNC Male to SO-239/UHF Female Right Angle Coaxial Adapter, Pair ...........................................................$34.99 NCE-CH0020010 NCE-CH0030001 OSL Calibration Set for RigExpert Antenna Analyzers The OSL (Open-Short-Load) Calibration Set allows the measurement reference plane of advanced RigExpert analyzers (AA-55ZOOM and higher) to be moved to the far end of a transmission line for accurate measurement of any antenna in its proper operating location. Af er selecting your analyzer’s “Calibrate” function and attaching the Open, Short and Load calibration standards to the end of a coaxial cable as directed, you can view the “true” characteristics of the antenna under test, as if the analyzer were connected directly to the antenna feedpoint. Open, Short, and Load standards are built into high-quality silver-plated chassis mount SO-239 (UHF female) connectors. DXE-OSL-CAL-SET OSL Calibration Set .....................................................................$65.99 OSL Calibration and Coaxial Adapter Kits These kits combine Chelegance's Open, Short, and Load SMA male calibration standards with three coaxial adapter types; choose the set that mates with your analyzer. Open, Short, and 50 Ω Load are used for analyzers that support automated OSL calibration. Using the included adapters, the calibration connectors can be placed, one at a time, directly on a network analyzer or antenna analyzer. On some analyzers, calibration connectors may be used at the end of coaxial cable to account for the complex impedance changes that connectors and cable lengths cause in RF systems. This process provides the most accurate measurements of the characteristics of the antenna. OSL Calibration Kits NCE-CH0030023-M 3 Standards SMA Male/3 SMA Female-UHF Male Adapters;$39.99 NCE-CH0030023-N 3 Standards SMA Male/3 SMA Female-N Male Adapters .....$44.99 NCE-CH0030023-B 3 Standards SMA Male/3 SMA Female-BNC Adapters .........$39.99 Check out our blog, OnAllBands.com, for articles on upcoming DXpeditions, what’s new in contesting, digital operations, and a range of other topics. Want more? We’ve got loads of tech videos and interviews on the DX Engineering YouTube channel. Of course, when you want personal attention, our experts are only an email or phone call away. In-stock parts typically ship the same day when ordered by 10 pm ET.
