60 Antennas: Vertical Add-On Kits for Hustler BTV Verticals DX Engineering of ers add-on kits that provide additional frequency band coverage or installation and operating convenience to the popular Hustler BTV vertical antenna family. Simply add the kit, make some minimal tuning adjustments, and you’re on the air with an additional band. The AOKC-17M and DXE-AOKC-12M are upgraded versions of the original 17 and 12 meter add-on kits. The stainless steel DXE-AOK-DCF allows simple connection of coaxial cable with a PL-259 connector. DXE-AOKC-12M Upgraded 12 Meter Add-On Kit for Hustler BTV Verticals .......$95.99 DXE-AOKC-17M Upgraded 17 Meter Add-On Kit for Hustler BTV Verticals .....$115.99 HSR-30-MTK 30 Meter Add-On Kit for Hustler 4BTV and 5BTV Verticals......$71.99 DXE-AOK-60M 60 Meter Add-On Kit for Hustler BTV Verticals ......................$121.99 DXE-AOK-80M 80 Meter Add-On Kit for Hustler 4BTV Verticals ....................$110.47 DXE-AOK-DCF Direct Coax Feed for Hustler BTV Verticals ..............................$42.99 DXE-8X19-RT Vertical Antenna Feedpoint Cable ...........................................$47.99 DXE-AOK-60M DXE-AOKC-17M DXE-AOKB-12M HSR-30-MTK DXE-AOK-DCF Multi-Band High Performance HF Vertical Antenna Systems Now with OMNI-TILT Option DX Engineering’s tech support teams have bundled together multi-band vertical antenna systems designed to get you on the HF bands quickly, without the component-matching hassles. The systems are based around a Hustler Multi-Band HF Vertical. The DX Engineering team chose Hustler because of the antennas’ performance, durability and versatility. The verticals are easy to tune and deliver outstanding performance. The P3 combos also include DX Engineering’s patented Radial Plate, which creates an ultra-reliable radial system to ensure optimized antenna performance. The patented DX Engineering Tilt Base makes it easy to raise/lower the antennas for service, bad weather, or to keep the neighbors happy. You’ll also get appropriate stainless steel clamps, hardware, direct coax feedpoint kit, SecureMount™ connector kit, coax jumper and a 64 page installation guide. The P2 packages come with everything in the P3 combos but include the OMNI-TILT base instead of the Tilt Base. Exact contents vary by system, visit DXEngineering.com for complete package details. Band Coverage Multi-Band High Performance HF Vertical Antenna Systems with OMNI-TILT Base Part Number 80M 40M 30M 20M 15M 10M Price DXE-HSR-4BTV-P2 X X X X $683.88 DXE-HSR-5BTV-P2 X X X X X $743.88 DXE-HSR-6BTV-P2 X X X X X X $779.88 Multi-Band High Performance HF Vertical Antenna Systems with DXE-TB-3P Tilt Base Part Number 80M 40M 30M 20M 15M 10M Price DXE-HSR-4BTV-P3 X X X X $630.89 DXE-HSR-5BTV-P3 X X X X X $690.89 DXE-HSR-6BTV-P3 X X X X X X $726.89 DXE-HSR-6BTV-P2 Service Parts for Hustler Verticals DX Engineering now stocks a ton of parts to keep your Hustler Antenna on the air for a long time. These are genuine Hustler parts, so you’re assured both excellent fit and function. Don’t see a critical part you need? Call us, we may be able to special order it for you—or perhaps suggest a custom solution. Part Number Description Price HSR-TRAPCVR-P Replacement Trap Caps, Set of 4 $19.99 HSR-3772-1 Clutch Nut for Old-Style RM Resonators $3.00 HSR-3774-1 Clutch Sleeve for Old-Style RM Resonators $1.50 HSR-4087-1 Lower Aluminum Tube for BTV Series $29.99 HSR-4090-1 10 Meter Trap for BTV Series $42.99 HSR-4090-2 15 Meter Trap for BTV Series $42.99 HSR-4090-3 20 Meter Trap for BTV Series $42.99 HSR-4090-4 30 Meter Trap for BTV Series $42.99 HSR-4098-1 Antenna Base Assembly Bracket for BTV Series $54.99 HSR-4457-1 Spider Assembly for 5BTV Antenna, 3-Blade $11.99 HSR-9471 Spider Assembly for 4BTV and 5BTV, with Hardware and Tubing $23.99 HSR-49-04-40S Antenna Whip for RM-40S Super Resonator $6.99 HSR-49-04-80S Antenna Whip for RM-80S Super Resonator $10.99 BTV Verticals The Hustler BTV antenna series delivers great performance, easy assembly, and the best reliability of any multi-band vertical on the market. These antennas of er 2:1 SWR or better at the band edges and up to a 100 kHz bandwidth on 75/80M (5BTV and 6BTV only). Hustler’s exclusive trap design of ers the lowest loss possible. Hustler BTV series antennas are a quarter-wave-trapped vertical design that should be ground-mounted with radials or elevated-mounted with tuned radials. Visit DXEngineering.com for more information about radials for quarter-wave vertical antennas. The sealed cover on the traps assures stable tuning in all kinds of weather. There is a wide tuning range designed in the antenna to accommodate dif ering ground plane conditions. All antenna sections use 1.25 inch heavy wall, high strength aluminum. The traps use a solid 1 inch fiberglass form for optimum electrical and mechanical stability. The base uses an extra heavy- duty aluminum mounting bracket with low loss, high strength insulators. HSR-4BTV BTV-4 Band Antenna Only .........................................$297.98 HSR-5BTV BTV-5 Band Antenna Only .........................................$357.98 HSR-6BTV BTV-6 Band Antenna Only .........................................$393.98 HSR-5BTV OMNI-TILT™ Vertical Antenna Tilt Base Packages Thanks to its all-new design features, the DX Engineering OMNI-TILT Vertical Antenna Tilt Base has become wildly popular. So, we decided to make it even easier to install by creating vertical antenna packages that include both the base and a comprehensive hardware kit. The OMNI-TILT Base was designed upon on the same proven-safe technology as the patented DX Engineering Saf-T-Tilt™ Base and the patented DXE-TB-3P Tilt Base. The antenna can’t fall when the fasteners are loosened. Lif ing the OMNI-TILT base plate disengages the bolts from the top, so the antenna can be easily lowered for maintenance or to protect it from extreme weather. It’s custom made from laser cut 1/8" thick stainless steel for strength and durability. All of the hardware used in the OMNI-TILT Base is stainless steel to ensure long and dependable service. The DX Engineering OMNI-TILT base is compatible with a wide variety of vertical antennas—including homebrew verticals. We make several OMNI-TILT optional mounting hardware kits available separately to expand and upgrade the base’s versatility. DXE-OMNITILT-1P OMNI-TILT Package for Trap Verticals ............................................ $105.98 DXE-OMNITILT-2P OMNI-TILT Package for Mast Mounted Verticals ........................... $163.97 DXE-OTMC-250P OMNI-TILT Mounting Clamp Kit ........................................................$31.99 DXE-TVA-HWK Replacement Tilt Base Hardware Kit .................................................$5.99 DXE-AOK-OT1194 OMNI-TILT Wing Nut Knobs ...............................................................$11.99 Note: OMNI-TILT shown with optional parts. DXE-AOK-OT1194 DXE-OTMC-250P Guy Rings You can use DX Engineering’s finely engineered Guy Rings to secure your rope guys and stabilize your DX Engineering, Hustler or other aluminum vertical antenna. They’re also great for our Telescoping Fiberglass and Aluminum Tubing Kits. These guy rings are super strong, virtually impervious to the elements and fit 0.75", 1.0", 1.25", 1.50" and 2.0" OD tubing. For all the specs, please visit DXEngineering.com. DXE-GR-2P Guy Rings, Set of 2 ...................................................................$5.29 DXE-GR-4P Guy Rings, Set of 4 .................................................................$10.29 DXE-GR-5P Guy Rings, Set of 5 ...................................................................$9.29 We stock many more items than we can show. See them all at DXEngineering.com!
