61 Antennas: Vertical Tilt Base No more climbing ladders or removing a bracket from the support post. One person can easily lif the antenna, tilt it to the side and walk it down. The optional DXE-AOK-TB1193 Wing Nut Kit makes for a no-tools fastening of the tilt base. Precision-cut from 3/16 inch 304 stainless steel, the Tilt Base is virtually indestructible and conveniently mounts to the same mast that you use for the antenna and radial plate. The Tilt Base is great for installations that need to accommodate CC&R, or for taking down antenna during severe weather. Use DXE-TB-3P for Hustler® BTV models, DXE-TB-4P for specific Butternut®, GAP, Hy-Gain and DX Engineering Verticals, and use DXE-TB-6P for HyGain 14AVQ. The DXE-TB-4P Tilt Base is intended for quarter-wave verticals that have a minimum of 1/2 inch and a maximum of 2 inch OD base, weigh up to 20 pounds, and have a height of no more than 28'. Vertical antennas up to 43' must be adequately guyed, and extra precautions should be taken when raising or lowering the antenna to avoid undue lateral stress on the tilt mechanism. If you are mounting your Tilt Base to a ground mounted pipe, you will need two DXE-SSVC-2P V-Bolt Saddle Clamps to complete the installation. DXE-TB-3P Tilt Base Kit for Hustler BTV Model Antennas ......................$83.99 DXE-TB-4P Tilt Base Kit for Antennas Other Than Hustler BTV .......... $129.46 DXE-TB-6P Tilt Base Kit for Hy-Gain 14AVQ .......................................... $122.48 DXE-TB-7P Tilt Base for COMTEK 40VA and 30VA Verticals, Kit........... $134.98 DXE-TB-8P Tilt Base for COMTEK 20VA Verticals .................................. $134.98 DXE-AOK-TB1193 Wing Nut No-Tools Kit, Pack of 2 ...........................................$11.99 DXE-SSVC-2P V-Saddle Clamp, 1" to 2" OD Applications ...........................$16.49 ...........................$16.49 DXE-SSVC-2P V-Saddle Clamp, 1" to 2" OD Applications ...........................$16.49 HF Antenna Mounting Heavy-Duty Pivot Base You don’t have to call a buddy—this base lets you raise your antenna without asking for help. It's perfect for both monoband and multi-band HF vertical antennas. In fact, this is the same base supplied with many of DX Engineering’s vertical antenna kits, including the 55'models, 80/40 meter DXE-8040VA-1, and 160 meter DXE-160VA-1. Made with stainless steel components and extra-strong Extren® insulated channels, the DX Engineering Pivot Base for 3" O.D. tubing is an excellent HF antenna mounting solution. Also choose the optional DXE-VRW-1 Manual Winch. Visit DXEngineering.com to see exact installation parameters. DXE-VA-PIVOT-3 Pivot Base, for 3" O.D. Base Tubing .........................$713.99 Shown with optional parts. Telescoping Aluminum Antenna Kit • 65' Maximum Length • Eleven telescoping sections from 2" to 7/8" OD • Stainless steel element clamps DXE-ATK65A Telescoping Aluminum Antenna Kit ............................. $459.99 DXE-VE-BASE Vertical Antenna Fixed Base Assembly, Insulated ...... $116.99 DXE-VA-BASE Vertical Antenna Tilt Base Assembly, Insulated ............... $202.99 DXE-VA-BASE BUT-HF6V BUT-HF9V BUT-MPS BUT-GRK BUT-290-05A BUT-A-15 Vertical Antennas Butternut Antennas have a well-earned reputation for performance and long life. They are easy to erect and tune, and will last many years. No lossy traps are used in these internationally acclaimed antenna designs. BUT-HF9V 9-Band, 80/40/30/20/17/15/12/10/6M ............................$959.99 BUT-HF6V 6-Band, 80/40/30/20/15/10M ...........................................$839.99 BUT-HF2V 2-Band, 80/40M .................................................................$659.99 BUT-MPS Mounting Post Sleeve for HF6V/HF9V ............................... $53.99 BUT-GRK Ground Radial Kit for HF2V/HF6V/HF9V ..........................$127.99 BUT-TBR-160X Newly Designed 160M Add-On Kit for HF2V/6V/9V ........$249.99 BUT-A-17-12 17/12 Meter Kit for HF6V, 277-10 ......................................$158.99 BUT-A-15 15M Resonator Kit for HF6V/9V ........................................$153.99 BUT-A-6 6 Meter Kit for HF6V, 277-12 .............................................$106.99 BUT-290-06A Replacement 67 pF Capacitor ............................................ $54.99 BUT-290-05A Replacement 200 pF Capacitor and Hardware Pack ....... $55.99 BUT-290-07A Replacement 67 pF and 200 pF Capacitor and Hardware Pack ....................................................................................$104.99 BUT-290-08A Replacement 75 Ohm Matching Cable with FPC, HF6V, HF9V ...................................................................................$139.99 BUT-290-08B Replacement 75 Ohm Matching Cable, HF6V, HF9V ........ $95.99 BUT-290-08C Feedpoint Connector, HF2V, HF6V, HF9V .......................... $63.99 BUT-290-11 Capacitor Bracket Replacement Kit,80/40/17/12M ......... $46.99 BUT-290-12 Tube B1 with Insulator ........................................................ $53.99 BUT-290-13 Replacement 30M Bracket and Capacitor Kit .................$119.99 BUT-290-14 Hardware Pack for HF2V ..................................................... $21.99 BUT-290-15 Hardware Pack for HF6V/HF9V........................................... $29.99 BUT-290-16 Insulator Replacement Kit for HF2V/HF6V/HF9V, Set of 2 .................................................................................. $36.99 BUT-290-17 Replacement Aluminum Tube B for HF6V, HF9V .............. $41.99 BUT-HF2V DXE-ATK65A Shown with optional parts Vertical Ground Mount Tubing Made from high strength, galvanized 4130 chromoly steel, DX Engineering Vertical Ground Mount Tubing is a solid choice for installing and supporting large vertical antennas, tilt pivot bases, and other antenna and mast tilt mounts. Intended for placement in concrete foundations, this cold-drawn, electric-weld tubing has a yield stress rating of over 100,000 PSI, a minimum tensile strength above 110,000 PSI, 0.250" wall thickness, and cold galvanized ends to inhibit rust. Tubing is available in two lengths specifically made for vertical antenna ground-mount usage and at reasonable common ground shipping costs: 2" OD about 5' 4" long and 3" OD about 7' 3" long. Note: Shipped tubing may be slightly longer than indicated. DXE-VGMT-2CG Galvanized Steel Tubing, 2" OD about 5' 4" long ..............$201.99 DXE-VGMT-3CG Galvanized Steel Tubing, 3" OD about 7' 3" long ..............$405.99 GPA-80 HF Vertical 80-6M Antennas Available in either fiberglass or aluminum, these Moonraker antennas provide a cost-ef ective solution to start enjoying the fun of getting on HF. Power rated at 400W and standing at a stealthy 19.69', they feature an unun-matched base, VSWR of less than 1.5:1 over all bands and 50 Ω to the transceiver with a user-supplied wide impedance range external tuner. Antenna mount and clamps included. Not for use with internal radio tuner. Adding radials is highly recommended to maximize performance. External ATU required. MKR-11-251 HF Vertical 80-6M Antenna, Aluminum ........................$169.99 MKR-11-252 HF Vertical 80-6M Antenna, Fiberglass .........................$199.99 BUT-TBR-160X DXEngineering.com is loaded with detailed photos, specs, videos, and more!
