129 ENGINES and COMPONENTS Order today! SummitRacing.com | 1-800-230-3030 Visit SummitRacing.com for more specs and photos, plus instructions and videos. BluePrint Engines Chevy LS3 EFI Retrofit Engine Equip your classic with a modern LS engine that delivers 530 hp and 495 ft.-lbs. of torque! This retrofit 6.2L fuel-injected powerplant starts with a brand-new GM aluminum block topped with BluePrint Muscle Series 259cc LS cylinder heads fitted with 2.165" intake/1.60" exhaust valves. A nodular iron crankshaft, forged connecting rods, and 10.7:1 hypereutectic pistons complete the rotating assembly. Additional components include: • Stage 2 hydraulic roller camshaft (612"/.585" lift and 225°/238° duration @ .050") • GM LS3 intake manifold with fuel injectors, rails, and drive-by-wire throttle body • Valve covers • Ignition coils with wiring harness • Engine sensors (additional sensors required) • Water pump • Timing cover • Harmonic balancer • Chevrolet Performance Musclecar oil pan Each engine is balanced, blueprinted, and dyno-tested for maximum performance, and backed by a 30-month/50,000-mile manufacturer’s warranty. NOTE: Requires NAL-19354332 engine controller kit. Call us or visit SummitRacing.com for details. MLL-PSLS3760CTF* .........................................................................each $10,149.00 With Serpentine Accessory Drive Adds a polished serpentine drive system with a power steering pump, alternator, and A/C compressor. MLL-PSLS3760CTFK* .......................................................................each $12,049.00 *A truck freight fee may apply. Details at SummitRacing.com. FREE BluePrint Engines Chrysler 408 Stroker Engine This 408 cu. in. stroker engine from BluePrint produces 375 hp and 460 ft.-lbs. of torque. The build starts with a hand-picked seasoned 360LA 2-bolt block that’s sonic tested, align bored, square decked, and loaded with the following features: • Magnum cast iron heads with 1.92" intake/1.625" exhaust valves • Flat tappet hydraulic lifter camshaft (.474"/.474" lift, and 238°/238° duration @ .050") • Balanced rotating assembly with a cast crankshaft, plus forged rods and pistons • High-volume oil pump • Steel valve covers and oil pan • Timing cover with mechanical fuel pump provision • Aluminum intake with a 750 cfm carb • Ready to run distributor (requires ignition coil) • Manufacturer’s 30-month, 50,000-mile warranty—call us or visit SummitRacing.com for more details. MLL-BPC4082CTC* ............................................................................ each $7,749.00 *A truck freight fee may apply. Details at SummitRacing.com. FREE Chevrolet Performance LS364/450 Crate Engine Give your classic a shot of modern performance, or swap your worn-out LS engine for a brand-new LS364/450 long block crate engine from Chevrolet Performance. It features a robust cast-iron LQ9 block with 6-bolt cross-bolted main caps, and comes equipped with high-performance LS3 aluminum cylinder heads, plus a high-lift LS6 cam (.550"/.550" with 204°/218° duration @ .050"), good for a rock-solid 452 hp and 441 ft.-lbs. of torque. Other features include: • Nodular iron crankshaft • Powdered metal connecting rods • Hypereutectic aluminum 10.3:1 pistons • 2.165" intake/1.590" exhaust valves • Cast aluminum 1.7:1 roller-style rocker arms • Powdercoated aluminum valve covers and timing cover • LS9 oil pan • 8" harmonic balancer • 24X reluctor wheel • Chevrolet Performance limited warranty—call us or visit SummitRacing.com for details. NOTE: Requires an LS3/L92-style intake manifold with rectangle ports. NAL-19434650 .....................................................................................each $6,610.77 A truck freight fee may apply. Details at SummitRacing.com. FREE BluePrint Pro Series Chevy 427 LS EFI Retrofit Dressed Engine Fire up your project with a dyno-proven 625 hp and 565 ft.-lbs. of torque! BluePrint’s Pro Series 427 LS stroker starts with a brand-new aluminum GM block that’s topped with BluePrint Muscle Series LS3 rectangle- port cylinder heads and a GM intake. It features a 90mm drive-by-wire throttle body, fuel rails, injectors, valve covers, all necessary sensors, coil packs, wiring harness, spark plugs and wires, throttle pedal, and ECM. It also includes: • 6-bolt, cross-bolted main caps • 4340 forged crankshaft and connecting rods • 58X reluctor wheel • 11:1 forged aluminum pistons • Single true roller timing set • 259cc intake/102cc exhaust runners • 2.165" intake/1.600" exhaust valves • Hydraulic roller camshaft (.624"/.624" lift, 239°/255° duration @ .050") • GM 1.7 ratio roller rockers with upgraded full-roller trunnion • Chevrolet Performance Musclecar® rear sump oil pan (8" D x 8" L sump) • Harmonic balancer (unless otherwise indicated) • Timing cover • BluePrint’s 30-month, 50,000-mile manufacturer’s warranty— call us or visit SummitRacing.com for details. NOTE: A separate controller is required for automatic transmission operation. MLL-PSLS4272CTF* .........................................................................each $15,049.00 Chevy 427 LS EFI Dressed Engine with Polished Accessory Kit Adds a complete and pre-installed polished billet aluminum front accessory drive system, which includes: • 140-amp, 1-wire alternator • Water pump • Pulleys and tensioner • Type II power steering (-6 AN pressure, -10 AN return) • Power steering pump reservoir (hoses not included) • 7B10 style air conditioning compressor • Brackets, hardware, and 8-rib belt MLL-PSLS4272CTFK* .................each $16,949.00 *A truck freight fee may apply. Details at SummitRacing.com. FREE Chevrolet Performance ZZ632/1000 Deluxe Crate Engine This is it—the biggest, most powerful crate engine ever from Chevrolet Performance! The ZZ632/1000 produces an incredible 1,004 hp at 6,600 rpm and 876 ft.-lbs. of torque at 5,600 rpm on 93-octane pump gas! It features a tall-deck cast-iron 4-bolt Bowtie Sportsman block, a forged 4340 steel crankshaft, H-beam connecting rods, and 2618 aluminum pistons. The 632 cu. in. big-block is topped off with a pair of Pro Stock-inspired RS-X aluminum cylinder heads designed by legendary GM engineer Ron Sperry. These CNC heads feature a straight- flow spread-port design with an elevated intake flange, modified valve angles, an optimized spark plug location, and titanium 2.450" intake/1.80" exhaust valves. Other highlights include: • 12.0:1 compression • 4.600" bore with 4.750" stroke • Hydraulic roller camshaft (.780"/.782" lift with 270°/ 285° duration @ .050") • Forged aluminum shaft-mount roller rocker arms (1.8:1 ratio) • Aluminum high-rise single-plane intake manifold with 4500-style throttle body • 86 lbs./hr. injectors and aluminum fuel rails • Pre-programmed, self-learning engine management • Crank-trigger ignition system with coil-near-plug ignition valley plate-mounted coils • Steel 8-quart oil pan • Aluminum water pump • Chevrolet Performance balancer with laser-engraved timing marks • Chevrolet Performance limited warranty—call us or visit SummitRacing.com for more details NOTE: Custom headers, compatible starter, high-pressure fuel system, and air cleaner required. NAL-19432060 .................................................................................. each $30,383.97 A truck freight fee may apply. Details at SummitRacing.com. FREE Learn more about this monster mill on the OnAllCylinders Podcast
