14 AIR & FUEL DELIVERY WARNING: For Proposition 65 information, see p. 183 Some parts are not legal for sale or use in California or other states with similar laws/regulations—see p. 183 for details. Edelbrock Pro-Flo 4 EFI Systems Edelbrock Pro-Flo 4 sequential port EFI systems are packed with cutting-edge technology for next-level performance. The easy-to-use, self-learning systems optimize engine performance as you drive, automatically compensating for changes in altitude, weather, and driving habits. Tuning is simplified through Edelbrock’s E-Tuner 4 app that connects to your wireless device via Bluetooth®. The app comes pre-loaded with a setup wizard (no start-up tune is required), plus dyno-developed calibrations and multiple dash displays for monitoring your engine’s vitals. An all-new compact, weather-resistant ECU provides the latest engine management technology, and horsepower ranges can be upgraded with matching injectors (sold separately). Kits include a 4150-style satin finish single-plane intake manifold with aluminum fuel rails, 1,000 cfm throttle body, plug-and-play distributor (where applicable), a fully terminated wiring harness, all required sensors and gaskets, and fuel injector options to support from 450-825 horsepower. Made in the USA. NOTE: Systems up to 550 horsepower require a high-pressure fuel system providing 43-60 psi with a minimum flow rating of 57 gph (215 lph). Higher horsepower systems and engines with power adders will require a fuel system providing a minimum of 90-125 gph (340-473 lph). Aeromotive Gen II Stealth Fuel Tanks Carbureted or injected, Aeromotive Gen II Stealth Fuel Tanks are the 21st-century fuel system solution for your classic needs! The direct-fit fuel tanks use patented Phantom technology to ensure quiet and consistent delivery, even in low fuel conditions and during spirited driving. The steel fuel tanks have a gray painted finish and arrive with the fuel pump, baffle, OE-range sending unit, and float all preinstalled and plumbed to a billet aluminum top hat with electrical terminals and male -6 AN supply/return ports. The stock mounting straps, filler cap, and vent are retained for fast, simple installation. 200 lph pumps support up to 450 hp forced induction/600 hp naturally aspirated EFI; or 600 hp forced induction/750 hp naturally aspirated on your carbureted setup. 340 lph pumps support up to 700 hp forced induction/850 hp naturally aspirated EFI; or 850 hp forced induction/1,000 hp naturally aspirated on your carbureted setup. Choose your pump by adding one of the following codes to the space in the part number: 1=200 lph pump or 4=340 lph pump. NOTE: Reduce horsepower ratings by 30% for E85 applications. GM Capacity 200 LPH 340 LPH 1955-57 16-gallon AEI-18_99 $780.85 $892.25 Camaro, 1968-68 18-gallon AEI-18_57 $780.85 $892.25 Chevy Camaro, 1969 18-gallon AEI-18_58 $780.85 $892.25 Camaro/Firebird, 1982-92 14-gallon AEI-18_71 $780.85 $892.25 Chevelle/Malibu, 1964-67 20-gallon AEI-18_17 $780.85 $892.25 Chevelle/Malibu, 1968-69 17-gallon AEI-18_04 $780.85 $892.25 Chevelle/Malibu/Monte Carlo, 1970-72 17-gallon AEI-18_02 $780.85 $892.25 Malibu/Monte Carlo, 1978-88 17-gallon AEI-18_51 $780.85 $892.25 C10 pickup, 1967-72, rear-mount* 17-gallon AEI-18_10 $1,056.45 $1,107.45 C10 pickup (swb), 1973-81 16-gallon AEI-18_70 $780.85 $892.25 C/K 1500/2500 pickup, 1988-98 25-gallon AEI-18_74 $624.90 $669.45 Ford Mustang, 1964-68 16-gallon AEI-18_97 $780.85 $892.25 Mustang, 1969-70 20-gallon AEI-18_47 $780.85 $892.25 Mustang, 1971-73 20-gallon AEI-18_69 $780.85 $892.25 *Rear-mount fuel tank (behind rear axle) replaces OE in-cab fuel tank. Includes installation kit: bed fuel filler cap assembly, frame rail/bed floor drill guides, and hardware. An oversize fee may apply. Details at SummitRacing.com. E-Street Return-Style Fuel System This complete fuel pump system is ideal for Pro-Flow EFI and other EFI systems up to 600 hp. This kit includes a 67 gph (255 lph) inline fuel pump, 35-90 psi adjustable return-style fuel pressure regulator, pre- and post-fuel filters, Russell Twist-Lok feed and return fuel lines, and fittings. Fuel tank feed and return line modifications may be required for installation. A baffled fuel tank is recommended to prevent fuel starvation. NOTE: Additional fuel pump mounting bracket may be required (not included). EDL-3604 ....................................................................................................... kit $618.95 Universal Adjustable EFI Sump Fuel Kit Give your existing carbureted mechanical-pump fuel system the increased pressure it needs to feed thirsty EFI systems up to 600 hp. Housed inside this kit’s molded, 9" H x 10" W x 31⁄4" D sump is a 67 gph fuel pump with an adjustable output of 35-90 psi. It includes a fuel filter, fuel line, fittings, mounting hardware, and a wiring harness. No return line or external regulator is required. NOTE: Sump has a vent that must be routed back to the fuel tank. Fuel tank must be vented or a vented fuel cap must be used. EDL-36031 Sump kit ......................................................................each $541.95 EDL-36032 Sump only ...................................................................each $441.95 *Gen III 24x applications require coil harness EDL-35713. Gen IV 58x applications require coil harness EDL-35714. +An oversize fee may apply. Details at SummitRacing.com. Chevy Application Max HP Rating Injector Size Price/ System EDL-35760 262-400, 1955-86 450 hp 29 lb./hr. $2,375.95 EDL-35770 262-400, 1955-86 550 hp 35 lb./hr. $2,404.95 EDL-35690 262-400, 1955-86 550 hp 35 lb./hr. $2,534.95 EDL-35780 262-400, with Vortec/ E-Tec heads 450 hp 29 lb./hr. $2,500.95 EDL-35710* Gen III & IV LS, cathedral port 550 hp 35 lb./hr. $2,266.95 EDL-35830 396-454, oval port 550 hp 35 lb./hr. $2,484.95 EDL-35840 396-454, oval port 825 hp 60 lb./hr. $2,699.95 EDL-35860 396-454, rectangle port 825 hp 60 lb./hr. $2,762.95 Ford EDL-35930 289-302 450 hp 29 lb./hr. $2,542.95 EDL-35940 289/302 550 hp 35 lb./hr. $2,571.95 EDL-35950 351W 550 hp 35 lb./hr. $2,542.95 EDL-35960+ 360-428FE 550 hp 35 lb./hr. $3,099.95 EDL-35680 429/460 675 hp 42 lb./hr. $2,767.95 Mopar EDL-35900 318-360LA 550 hp 35 lb./hr. $2,483.95 EDL-35910 413-440 550 hp 35 lb./hr. $2,737.95 EDL-35670 426-572 Gen II Hemi, dual-quad 825 hp 60 lb./hr. $3,239.95 Pontiac EDL-35980 326-455 550 hp 35 lb./hr. $2,777.95 AMC EDL-35650 290-401 550 hp 35 lb./hr. $2,483.95 Mopar tanks available on page 167! Edelbrock Performer Series Marine Series Carburetors These Edelbrock Performer Marine Series Carburetors are U.S. Coast Guard-compliant and each one comes with a sealed accelerator pump, iridited body, PTFE-coated shafts and pump arm, 3/8" inverted flare inlet, fuel pump vent, and no vacuum ports—just what you need to take Edelbrock performance to the high seas. Made in the USA. EDL-1409 600 cfm .......... each $621.95 EDL-1410 750 cfm .......... each $621.95 Tune from your smartphone or tablet! • Air/fuel ratio • Ignition curve • Idle speed • Rev limiter • Cooling fans …and more! Holley Sniper EFI Stealth 4150 Fuel Injection Systems For all the power and drivability of a modern EFI setup with some old-school cool, set your sights on a Sniper EFI Stealth 4150 fuel injection system from Holley! These complete 4150-style TBI systems come equipped with a built-in, self-tuning ECU that gets you up and running without any complicated programming, as well as a kickdown provision for TH-350/400, TH-700-R4, or C-4/6 transmissions. A 31⁄2" color touchscreen controller makes setup and adjustment easy—it even provides live performance data! Sniper EFI Stealth systems bolt directly to your ride’s 4150-style intake manifold and plug in using the included wiring harness. They feature fully integrated TPS, IAC, IAT, and MAP, with four 100 lb./hr. injectors to support naturally aspirated engines up to 650 hp. Get yours with a shiny polished finish, satin black ceramic powdercoat, or OEM-style gold finish. Call us or visit SummitRacing.com for all the details! SNE-550-870 Polished ............................................................... each $1,499.95 SNE-550-871 Black .................................................................... each $1,549.95 SNE-550-872 Gold...................................................................... each $1,549.95 Sniper Stealth 4150 Master Kits These handy kits help you finish the job: they come with everything above plus a high-pressure electric in-line fuel pump (HLY-12-920), pre- and post-pump filters, 20 ft. of Vapor Guard fuel hose, fittings, and hardware. SNE-550-870K Polished ............................................................... each $1,799.95 SNE-550-871K Black .................................................................... each $1,849.95 SNE-550-872K Gold...................................................................... each $1,849.95 SNE-550-871
