Some parts are not legal for use in California or other states with similar laws/regulations. Some parts are not legal for sale or use in California or other states with similar laws/regulations—see pg. 2 for details. WARNING: For Proposition 65 information, see pg. 2 Fuel Injectors • Cold Air Intake Kits • TBI Spacers TFX TM Fuel Injectors With electronically drilled and machined disc-type fuel control valves, plus improved nozzles and coil windings, Trick Flow TFX fuel injectors atomize fuel better, resist clogging, are quieter, and require less energy to operate than other aftermarket injectors. And the features don’t stop there. Low magnetic stainless steel injector bodies prevent corrosion from underhood contaminates and seal the injectors from moisture contamination. OEM-style clip grooves secure the injectors to fuel rails and eliminate possible fuel leaks. Viton® fl uoroelastomer O-rings seal the injectors to the fuel rails and intake manifold to prevent fuel and air leaks under extreme operating conditions. High-quality, 1/2 micron fi lter screens keep foreign debris and contaminants from entering the injectors to ensure proper performance and a long life cycle. TFX fuel injectors are 100% duty cycle tested to ensure reliability and performance. Sold in sets of 8. Also available individually by adding “-1” to the end of the part number. All fl ow values are at 3 bar (43.5 psi). TFX Bosch EV1-Style Fuel Injectors TFS-89024 Fuel injectors, 24 lbs./hr., 14.4 ohms, Jetronic plugs, set of 8 TFS-89030 Fuel injectors, 30 lbs./hr., 14.4 ohms, Jetronic plugs, set of 8 TFS-89036 Fuel injectors, 36 lbs./hr., 14.4 ohms, Jetronic plugs, set of 8 Billet Aluminum Fuel Injector Height and Harness Adapters Trick Flow billet aluminum fuel injector height adapters bridge the gap between different fuel injector and intake manifold heights to ensure proper alignment and a leak-free seal. The adapters are made from black anodized billet aluminum and fi t Trick Flow High-Performance Flow-Matched Fuel Injectors. Also available is an adapter harness that connects Multec injector plugs to USCAR-style fuel injectors and a pin and connector kit for USCAR injectors. Fuel Injector Height and Harness Adapters TFS-8914000-A48 Height adapters, 48mm, set of 8 TFS-8914000-A53 Height adapters, 53mm, set of 8 TFS-8914000-A65 Height adapters, 65mm, set of 8 TFS-89203 Harness adapter, USCAR to Multec, each TFS-89204 USCAR pin and connector kit, each TFX TM Fuel Injector Adapters Trick Flow’s TFX fuel injector connectors and adapters make swapping intake manifolds and fuel injectors on late-model GM LS-based engines quick and painless. No cutting is necessary, and they are made to OEM specifi cations for a secure connection and to keep the contacts free of water, dirt, and debris. TFS-89201 Adapter, EV1 injector to EV6 harness, each TFS-89202 Adapter, EV6 injector to EV1 harness, each TFS-89030 High-Performance Flow-Matched Fuel Injectors Trick Flow high-performance fl ow-matched fuel injectors provide consistent, balanced fuel delivery to each cylinder. This is critical to pushing the limits of performance because matched injectors improve power production, allow safer engine operation, and reduce emissions. Stainless steel internal components guarantee that the industry-leading atomization and spray patterns with linear fl ow at very low pulse widths are maintained. The results speak for themselves. These precision dynamic fl ow-matched injectors delivered unsurpassed fl ow balance when tested at 3- and 5-milliseconds pulse widths as confi rmed on a variety of different test benches by multiple USA-based third-party testing labs. Trick Flow high-performance fl ow-matched fuel injectors have a high impedance design. They use the popular ultra-compact, EV14 body with USCAR connectors for a drop-in, no hassle installation. The injectors function in the 8- to 18-volt operating range at a maximum operating pressure of 100 psi. They are compatible with gasoline, methanol, and E85 fuels. Full characterization data for programming stock and/or standalone ECUs can be found under the Instructions & Calculators tab by clicking the icon labeled Charts and Guides, or by navigating to https://www.trickfl ow.com/injectors. Sold in matched sets only. TFS-8914042 Fuel injectors, fl ow-matched, GM LS3/L99/LS7/L76 OEM-replacement, 42 lbs./hr., 10 ohm, set of 8 TFS-8914080 Fuel injectors, fl ow-matched, 80 lbs./hr., 10 ohm, set of 8 TFS-8914110 Fuel injectors, fl ow-matched, 110 lbs./hr., 10 ohm, set of 8 TFS-8914156 Fuel injectors, fl ow-matched, 156 lbs./hr., 8 ohm, set of 8 TFS-8914205 Fuel injectors, fl ow-matched, 205 lbs./hr., 8 ohm, set of High-Performance Flow-Matched Fuel Injector and Height/Harness Adapter Kits Trick Flow also offers its High-Performance Flow-Matched Fuel Injectors in complete kits that include the proper height adapters, harness adapter, and O-rings to fi t GM LS, small block Ford, and Ford Modular engines. They are available with your choice of 36, 80, 110, 156, and 205 lbs./hr. @ 3-bar fl ow rate injectors in matched sets of 8. Small Block Ford TFS-891404265EB8 Injector/harness adapter kit, 42 lbs./hr., LS1/EV1 TFS-891408065EB8 Injector/harness adapter kit, 80 lbs./hr., LS1/EV1 TFS-891411065EB8 Injector/harness adapter kit, 110 lbs./hr., LS1/EV1 TFS-891415665EB8 Injector/harness adapter kit, 156 lbs./hr., LS1/EV1 TFS-891420565EB8 Injector/harness adapter kit, 205 lbs./hr., LS1/EV1 Ford Modular TFS-891404265UB8 Injector/harness adapter kit, 42 lbs./hr., USCAR TFS-891408065UB8 Injector/harness adapter kit, 80 lbs./hr., USCAR TFS-891411065UB8 Injector/harness adapter kit, 110 lbs./hr., USCAR TFS-891415665UB8 Injector/harness adapter kit, 156 lbs./hr., USCAR TFS-891420565UB8 Injector/harness adapter kit, 205 lbs./hr., USCAR GM LS TFS-891404253UB8 Injector/harness adapter kit, LMG/L59, 42 lbs./hr., USCAR TFS-891408053UB8 Injector/harness adapter kit, LMG/L59, 80 lbs./hr., USCAR TFS-891411053UB8 Injector/harness adapter kit, LMG/L59, 110 lbs./hr., USCAR TFS-891415653UB8 Injector/harness adapter kit, LMG/L59, 156 lbs./hr., USCAR TFS-891420553UB8 Injector/harness adapter kit, LMG/L59, 205 lbs./hr., USCAR TFS-891404253UO8 Injector/harness adapter kit, LS2, 42 lbs./hr., USCAR TFS-891408053UO8 Injector/harness adapter kit, LS2, 80 lbs./hr., USCAR TFS-891411053UO8 Injector/harness adapter kit, LS2, 110 lbs./hr., USCAR TFS-891415653UO8 Injector/harness adapter kit, LS2, 156 lbs./hr., USCAR TFS-891420553UO8 Injector/harness adapter kit, LS2, 205 lbs./hr., USCAR TFS-891404248MB8 Injector/harness adapter kit, LQ4, 42 lbs./hr., Multec TFS-891408048MB8 Injector/harness adapter kit, LQ4, 80 lbs./hr., Multec TFS-891411048MB8 Injector/harness adapter kit, LQ4, 110 lbs./hr., Multec TFS-891415648MB8 Injector/harness adapter kit, LQ4, 156 lbs./hr., Multec TFS-891420548MB8 Injector/harness adapter kit, LQ4, 205 lbs./hr., Multec TFS-891404248UB8 Injector/harness adapter kit, L92/L96, 42 lbs./hr., USCAR TFS-891408048UB8 Injector/harness adapter kit, L92/L96, 80 lbs./hr., USCAR TFS-891411048UB8 Injector/harness adapter kit, L92/L96, 110 lbs./hr., USCAR TFS-891415648UB8 Injector/harness adapter kit, L92/L96, 156 lbs./hr., USCAR TFS-891420548UB8 Injector/harness adapter kit, L92/L96, 205 lbs./hr., USCAR TFS-8914080O8 Injector/harness adapter kit, LS3/LS4/LS7/LS9, 80 lbs./hr., USCAR TFS-8914110O8 Injector/harness adapter kit, LS3/LS4/LS7/LS9, 110 lbs./hr., USCAR TFS-8914156O8 Injector/harness adapter kit, LS3/LS4/LS7/LS9, 156 lbs./hr., USCAR TFS-8914205O8 Injector/harness adapter kit, LS3/LS4/LS7/LS9, 205 lbs./hr., USCAR TFS-8914110 TFS-89202 TFS-89201
